Vinyl Siding Installation Cost in Vermont (2026)

Vinyl Siding Installation in Vermont runs $3.50–$11.97 per sq ft, with most projects landing near $7.00. Vermont prices run close to the national median of $7.00 — within ±10%.

Vermont 2026 pricing

Tier	Price per sq ft	What you get
Budget	$3.50	Entry-tier materials, contractor lower hourly rate
Typical	$7.00	Mid-tier materials, established local contractor
Premium	$11.97	Premium materials, top-rated installer, custom work

Source: National median $7.00 × BLS Regional Price Parity (2022) applied to Vermont. Last updated 2026-05-25.

Why Vermont pricing looks like this

Northeastern states like Vermont carry higher labor and permit costs, with cold-weather climate adding 8–15% to seasonal pricing.

Specific factors that move Vermont pricing relative to the national baseline:

High permit costs — some municipalities charge $200–$800 above national norms
Older housing stock requires more retrofit / code-compliance work
Snow-load specs drive heavier structural materials (roofing, decks)
Tighter labor market — fewer skilled trades per capita than other regions

Pricing by major metro in Vermont

Within Vermont, metro-level pricing varies by labor market and cost of living. Multipliers below are applied to the state typical of $7.00.

Metro	Typical price	Range	Notes
Burlington	$7.35	$3.68–$12.57	Close to state average
South Burlington	$7.14	$3.57–$12.21	Close to state average
Rutland	$6.65	$3.33–$11.37	5% below state avg

Metro multipliers from BLS metro-level Regional Price Parity. Always verify with 2–3 local quotes — actual contractor pricing varies ±15% within a metro depending on specific neighborhood, season, and contractor availability.

Estimate your specific vinyl siding installation cost in Vermont

Vinyl Siding Installation Cost Calculator

Enter your project size and specifics — we'll estimate the total range a local contractor is likely to quote.

Wall Square Footage (per sq ft) Multiply your floor area by 1.2 to estimate wall area. Small house: 1,500. Standard 3-bed: 2,400–2,800. Large 2-story: 3,500–4,500.

Vinyl Grade

Trim Package

Old Siding Removal

House Wrap + Insulation

Your State

Estimated total project cost

—

Calculator defaults to National average. Switch the "Your State" dropdown to Vermont to apply local pricing.

Frequently asked questions about Vinyl Siding Installation in Vermont

How much vinyl siding do I need for my house?

Take the floor area, multiply by 1.0–1.3 to estimate wall area. A 2,000 sq ft floor house typically has 2,400–2,800 sq ft of siding area. Add 10% for waste (cuts, gables, corners) and 5% extra for trim. Most contractors estimate from a quick walk-around — measuring tape on a clipboard is the industry standard.

Vinyl vs fiber cement (Hardie) — which is better?

Vinyl lasts 30–40 years, costs $3.50–$12/sq ft installed, never needs repainting, but can crack from impact (hail, baseball) and shows seams. Fiber cement (James Hardie) lasts 50+ years, costs $6–$14/sq ft installed, needs repainting every 10–15 years, but holds up better to fire, impact, and pest damage. Vinyl wins for volume replacement on a budget. Fiber cement wins for long-term resale in fire-prone or coastal markets.

How long does vinyl siding last?

Quality vinyl installed correctly lasts 30–40 years. Color holds for 15–20 years before noticeable fading on south-facing walls. The biggest failure modes are impact damage (replacing a single cracked panel: $50–$200), wind-driven separation from incorrect nailing, and warping from heat exposure (next to BBQ, near light-colored brick reflecting heat). Brands warranty 25–50 years against manufacturing defects, but warranties exclude impact and labor.

Do I need new house wrap or insulation under the siding?

House wrap (Tyvek, ZIP, or equivalent) is required by IRC code for new installs and most full re-sidings. Adds $0.40–$0.80/sq ft. If your existing wrap is intact, you can usually leave it. Adding insulation under the siding is a separate decision — foam board (R-3 to R-5, $1–$2/sq ft) is the common upgrade. Insulated vinyl panels (R-2 to R-4 built into the siding) add $1.50–$3/sq ft over standard vinyl.

Can I install vinyl over existing siding?

Sometimes, but usually not advised. You can install over wood lap siding if it's flat, dry, and nailed tight — saves $1–$2/sq ft in demo + disposal. You cannot install over existing vinyl, stucco, or anything cracked/warped. Most contractors prefer full tear-off because hidden water damage gets fixed during removal and insurance pays for the demo when storm-related.

Compare nearby states

National guide →
Full guide with all 50 states and methodology
Massachusetts pricing →
$3.85–$13.17 per sq ft
Connecticut pricing →
$3.64–$12.45 per sq ft
New Hampshire pricing →
$3.53–$12.09 per sq ft

About this data. National baseline of $7 derives from aggregated 2026 quote data across major lead-gen platforms. State-level figures apply Bureau of Labor Statistics Regional Price Parity (2022, all-items) to the national baseline. We refresh quarterly and welcome corrections — email [email protected] if a local quote you received falls materially outside our state range. See full methodology.